answer port 06, than the calls are routed based on port 06’s back up. If both ports are
busy, port 05’s back up is used.
Speed dialing
TeleCraft stores up to 50 telephone numbers and re-dial them from memory. The first
speed dial number is 700 and the last one is 749. Each speed dial number stores up to
40 digits and may include a calling sequence, credit card number, entry codes, etc.
For example, if you programmed speed dial number 710 to dial 1-310-575-1508.
Pressing 710 causes TeleCraft to automatically select an external line and dial
1-310-575-1508. Of course, if the area code is not needed, it should not be entered.
Automatic dialing,
door entry
You may program any port to automatically dial any internal or external number
immediately after you lift the receiver. This feature is especially helpful for door entry
systems. Once a guest lifts the receiver, the designated telephone(s) ring, and you may
let the guest in.
Note that in this mode, the port cannot perform call transfers, call pick-up, etc.
Conference calls
You create a conference call by adding any internal extension or external telephone to an
on-going conversation. Due to loss of signal levels,
GCT
suggests limiting the number of
participants in the conference call. You cannot create a conference call unless at least
one of the parties is external.
Call recording
Call recording allows you to record a call with any outside person. TeleCraft plays a
message informing you that the call is being recorded and suggests that you may hang
up to prevent recording. This call is sent to your mailbox as a new message. You can
limit the duration of call recording. See the Installation and Programming Manual.
Barge-in
In emergencies, you can join any conversation that involves an external line. The
duration of this barge-in is limited to 12 seconds.
You can barge-in to any conversation that involves external lines. You should follow the
code of conduct in your organization before using this feature. Certain TeleCraft versions
further restrict the use of this feature.
Step-by-step:
1. Lift your telephone receiver, and wait for the intercom dial tone.
2. Press "8" followed by “911” followed by the external line number to connect to.
TeleCraft Telephone Systems
Page 13
