Vhandy Technology
GCAN-212 user manual
Please note: After the configuration is successful, the GCAN-212 needs to be
powered on again. When using the network debugging assistant, you need to
check 'Hexadecimal Display' and 'Hexadecimal Send'.
6.3 TCP Client mode communication test
In the configuration software, set the TCP Mode of the CAN1 channel to 2, that
is, GCAN-212 is in TCP Client mode; the remote IP address (Remote IP) is the
IP address of the PC, and the remote port number (Remote Port) is the port
number of the IP address , The default value is 8001. Enter the network
debugging assistant, select the protocol type as TCP Server; the local host
address is the PC IP address, and the local host port is the remote port number
set in the configuration software
.