Vhandy Technology
GCAN-212 user manual
4. Use of CANet-Wifi-Config software
GCAN-212 can use CANet-Wifi-Config software to configure its parameters,
including: working mode, working port, module IP, CAN working mode, CAN
baud rate and other basic parameters.
4.1 Restore factory settings
GCAN-212 hardware factory default IP: 192.168.1.10, if the user has modified
the IP address but forgot, then you can reset its parameters through the reset
button in the device.
The system default IP: 192.168.1.10, the default CAN bus baud rate is 250k.
(Refer to 3.1.1 for details about restoring factory settings)
4.2 GCAN-212 connection
When configuring the GCAN-212 device, you only need to connect the power
supply and connect the Ethernet port to the computer. Open the CANet-Wifi-
Config software, select GCAN-212 (CANET) as the device type, and enter the
IP address of GCAN-212 (default IP: 192.168.1.10, see 3.1.1 for details on
restoring factory settings).
Click "Connect" and the following software interface will appear after
successful connection.
There are 6 tool buttons at the top of the software:
'Connect'-connecting device.