gc Aadva Lab Scanner 2 Manual Download Page 29 | Manualshive

Page: 29 / 56

background image

29

Aadva Lab Scanner 2

Manual

•

Place the Multisplit mounting plate on the Multisplit base plate of the scanner. Ensure that the protrusions
(“Corners”) on the underside of the Multisplit mounting plate fit into the recesses of the Multisplit base plate.

7. Positioning of a single jaw model

You have several options for fastening single jaw models.

•

Inserting a jaw model with a Multisplit mounting plate

•

Inserting a jaw model with an adapter plate

•

Inserting a jaw model with an object holder

7.1. Inserting a jaw model with a Multisplit mounting plate

OBSERVE THE SAFETY INSTRUCTIONS!

No additional fastening is required for jaw models plastered on a Multisplit mounting plate.

You can place the Multisplit mounting plate directly on the Multisplit base plate of the scanner. This option exists for
the articulator systems AMANN GIRRBACH Artex® and Baumann Dental Artist/ArTO®.

•

Plaster the jaw model onto the Multisplit mounting plate according to the manufacturer’s instructions.

Make sure to insert a magnetic adhesive disk into the Multisplit mounting plate.

The Multisplit mounting plate will adhere to the magnet of the Multisplit base plate.

The Multisplit mounting plate fits correctly when the plates are exactly congruent.

Additional securing of the plastered jaw model is not necessary.

«
...
27
28
29
30
31
...
»

Summary of Contents for Aadva Lab Scanner 2

























































Reviews:

No comments

Related manuals for Aadva Lab Scanner 2

Brand: Landoll Pages: 34

Brand: Raith Pages: 26

Brand: Kane Pages: 16

Brand: C.M.O Pages: 10

Brand: Abicor Binzel Pages: 92

Brand: Garmin Pages: 20

Brand: EuroLite Pages: 28

Brand: Jasco Pages: 2

ENET-232 Series

Brand: National Instruments Pages: 105

Brand: Nautilus Pages: 17

Brand: National Instruments Pages: 6

Implantmed SI-1010

Brand: W&H Pages: 2

Brand: ASIA TECHNOLOGY Pages: 38

Brand: Bodyworx Pages: 17

Brand: Wood-mizer Pages: 59

Brand: Tandem Pages: 7

Brand: Waldman Pages: 60

Brand: Struers Pages: 95

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands