42
CORRECT FASTENING
The Triple Tray® impression is fastened correctly if:
– it is clamped
– it is positioned parallel to the lower part of the Triple Tray® impression holder
– the impression to be scanned faces upwards.
TURNING A TRIPLE TRAY® IMPRESSION
To scan the other side of the Triple Tray® impression, turn the upper part without releasing the impression from the clamp.
•
Separate the upper part from the lower part applying a little force.
The magnetic contact is released.
•
Turn the upper part so that the other side of the impression faces upwards.
•
Press the lower magnetic point against the lower part.
The upper part will adhere magnetically to the lower part. The adhesive effect is reinforced by the grooves and
braces.
INSERTING THE TRIPLE TRAY® IMPRESSION HOLDER
•
Hold the Triple Tray® impression holder from the rear.
•
Place the Triple Tray® impression holder with the impression facing forwards inside the scanner.
The Triple Tray® impression holder will adhere to the magnet of the Multisplit base plate.
The protrusions (“Ovals”) on the underside of the plastic plate engage with the recesses of the Multisplit base plate.
The Triple Tray® impression faces to the rear of the scanner.
Summary of Contents for Aadva Lab Scanner 2
Page 55: ...55 Aadva Lab Scanner 2 Manual ...
