![background image](http://html1.mh-extra.com/html/gbc/talon-44-ce/talon-44-ce_installation-and-operation-manual_4077073028.webp)
Operations Manual
Page 28
©2004 General Binding Corporation
T
ALON
44/64
CE
Start Laminating
1.
The safety shield and feed table must be in the normal
operating position.
2.
Select a job mode ( ) and ensure the proper speed
and temperatures are set.
3.
Set the roller handle to one of the laminating posi-
tions.
4.
Press the
PRESS/ RELEASE ( )
button. The main
rollers gap.
CAUTION: HOT ROLLS.
Rolls may be hot, use caution
to prevent burns.
5.
Press the
RUN ( )
button.
6.
Press the
PRESS / RELEASE ( )
button. The main
rollers close.
7.
Adjust unwind and rewind tensions as necessary.
8
. Align the leading edge of the item square to the heat
roller nip (Figure 31).
9.
With both hands and an outward force push the image
slower than the speed of the rollers into the nip of the
heat rollers (Figure 32).
CAUTION:
Avoid forcing the image into the main roller nip
as this action will cause the corners of the leading edge
to buckle and create a wave.
Fig 31
Fig 32
Summary of Contents for Talon 44 CE
