![background image](http://html1.mh-extra.com/html/gbc/talon-44-ce/talon-44-ce_installation-and-operation-manual_4077073019.webp)
Operations Manual
Page 19
T
ALON
44/64
CE
©2004 General Binding Corporation
E. UPPER REWINDER DIRECTION SWITCH:
(Figure 10)
This switch enables the operator to control the direction
of the upper rewind/ unwind shafts.
“FWD.”
: In this position, the motor runs in a forward
direction.
“STOP”
: Stops the rewinder motor for the rewind/ unwind
shaft selected.
“REV.”
: In this position, the motor runs in a reverse direc-
tion.
F. LOWER REWINDER DIRECTION SWITCH:
(Figure 10)
This switch enables the operator to control the direction
of the Lower rewind/ unwind shaft.
“FWD.”
: In this position, the motor runs in a forward
direction.
“STOP”
: Stops the rewinder motor for the rewind/ unwind
shaft selected.
“REV.”
: In this position, the motor runs in a reverse
direction.
G. REAR CONTROL SWITCH:
(Figure 11) This switch
enables the operator to run jobs from the rear operating posi-
tion of the laminator when rear controls are enabled.
–
“REVERSE”
: In this position, the rollers turn from the
front operating position towards the rear operating
position.
–
“STOP”
: Stops the movement of the rollers.
–
“RUN”
: In this position, the rollers turn from the rear
operating position towards the front operating posi-
tion.
–
ENABLE REAR CONTROL SWITCH:
To enable
the rear control switch, press and hold
JOB
until
you hear a beep, approximately 3 seconds.
REAR
CONTROL
replaces
READY/ WAIT
on the control
panel display.
Replace the rear slitter with the safety shield properly
installed and latched.
–
DISABLE REAR CONTROL SWITCH:
Press and
hold
JOB
again to disable the rear control switch.
H. FOOT SW ENABLE:
(Figure 12) In this mode
permits operation using the footswitch. Refer to
Item
V. FOOTSWITCH
for operation.
Fig 10
Fig 11
(H)
Release
BOT
TOP
Foot SW Enable
JOB
SPEED
032
o
F
032
o
F
03
01
Fig 12
Summary of Contents for Talon 44 CE
