Operations Manual
Page 20
©2004 General Binding Corporation
T
ALON
44/64
CE
Features Guide
A. E-STOP:
(Figure 13) Two E-STOP buttons exist on
the laminator. One on each side of the upper cabinet. To
engage (1), press either push button, roller movement is
stopped. To disengage (2), turn the push button clockwise
once the emergency condition has been resolved.
B. SAFETY SHIELD INTERLOCK LATCH:
(Figure 14)
Used to lock the safety shield into position and activate an
interlock switch. The interlock latch is located on the left
side of the safety shield. When pushed to the full left (1),
the safety shield is locked. When pushed to the full right
(2), the safety shield is unlocked
C. SAFETY SHIELD:
(Figure 14) Prevents entanglement,
entrapment and inadvertent contact with the heat rollers.
The laminator will operate only when the Safety Shield is
located in the fully locked position. To remove the safety
shield, unlock the safety shield interlock latch and lift
the safety shield (1) up and away from the safety shield
mounting pins (2).
D. FEED TABLE:
(Figure 15) The Feed Table is used to
position items for lamination. The laminator will operate
only when the Feed Table and Feed Table Latch are
properly installed.
E. HEAT ROLLERS:
(Figure 15) Silicone rubber coated
steel tubes heat the laminating film and press the heated
film to the items being laminated. Heat is provided by an
internal heating element. The heat rollers are motor driven
for ease of loading new film.
F. PULL ROLLERS:
(Figure 15) The pull rollers, located
at the back of the laminator, are motor driven. They
simultaneously pull the film and improve the quality of
the laminated item.
G. ROLLER HANDLE:
(Figure 16) The roller handle manu-
ally sets the position of the pull rollers while simultaneously
electronically setting the main rollers.
Available settings are;
– Release
– 15 mm Mounting
– 10 mm Mounting
– 5 mm Mounting
– 3 mm Mounting
– Low-Prs Laminating
– Mid-Prs Laminating
– High-Prs Laminating
(Prs = pressure)
Fig 13
Fig 14
Fig 15
Summary of Contents for Talon 44 CE
