Operations Manual
Page 34
©2004 General Binding Corporation
T
ALON
44/64
CE
Heat
The
“WAIT (Too COLD)”
indicator may appear if the speed
is set too fast for the material being laminated. Either lower
the speed setting or press
STOP
and wait until the
“READY”
indicator appears.
Operation of the laminator for more than thirty minutes at
a time may necessitate a lower speed setting. It is recom-
mended that, during periods of long runs, the items being
laminated are alternated between thick and thin. Do not
combine thick and thin items at the same time, as this will
result in a poor edge seal around the thinner material. If
you are unsure that the laminator is set at the proper speed
for the item to be laminated, run a test piece (scrap) of
the same or similar material through the laminator. This
procedure is recommended because rotating the heat
roller prior to lamination will more evenly distribute the
heat. Make speed adjustments if necessary.
Output
1. “D” waves in the image (Figure 43 A).
– Check paper tension.
– Paper may be damp or not dry.
2. “D” waves in the laminate (Figure 43 B).
– Change roller handle pressure.
3. Straight waves in output (Figure 44 A).
– Check operational settings for materials being used.
– Insufficient cooling time.
– Output was handled prior to cooling.
– Use cooling feature if not on.
4. Indent waves in output after pull rollers
(Figure 44 B).
– Machine was stopped on print.
5. Angled waves in the output (Figure 45 A & B).
– Change roller handle pressure.
– Check for even paper tension (Figure 43 A only).
Fig 43
Fig 44
Fig 45
Summary of Contents for Talon 44 CE
