![background image](http://html.mh-extra.com/html/gbc/arctic-titan-165/arctic-titan-165_instruction-manual_570922025.webp)
Parts changing
Titan 165/ 110 Technical Service Manual
Page 3 - 3
© GBC Films Group October 2000
3.1.2 Replace the cabinets
Tools required
• 3 mm allen wrench
• 2.5 mm allen wrench
• #2 phillips head screw driver
a) While the second person is holding the control
side cabinet, connect the contact block to the
emergency stop push button and the display
panel cable to the control panel circuit board.
b) Have the second person align the holes of the
control side cabinet with the holes on the side
frame while you secure it using the #2 phillips
head screw driver.
c) While the second person is holding the drive
side cabinet, connect the contact block to the
emergency stop push button.
d) Have the second person align the holes of the
drive side cabinet with the holes on the side
frame while you secure it using the #2 phillips
head screw driver.
e) Replace the upper and lower unwind brake
handles and secure in place using a 2.5 mm
allen wrench to tighten the set screws.
f) Replace the main roller lift handle and secure in
place using a 3 mm allen wrench to tighten the
screw.
C o n ta c t b lo c k
D rive s id e c a b ine t
C o n tro l s id e c a b in e t
B ra k e h a nd le s
L ift h a n d le