![background image](http://html.mh-extra.com/html/gbc/arctic-titan-165/arctic-titan-165_instruction-manual_570922012.webp)
Servicing
Titan 165/ 110 Technical Service Manual
Page 1 - 2
© GBC Films Group October 2000
Semi-Annual
• Lubricate sprockets and chains.
( See Lubrication in this section )
E L E C T R IC A L
S H O C K
R em ove pow er from the lam inator before
servicing. Y ou can be severely shocked,
electrocuted or cause a fire.
• Check wire termination tightness and molex
connectors.
( Main power, terminal blocks, etc. )
Annually
IN F O R M A T IO N
T his is recom m ended to prolong the life of
the m achine bu t not req uired.
• Schedule an overall check up.
( Voltage, wear and tear, etc..... )
1.2 Cleaning the rollers
Tools required
• Protective rubber gloves
( protect your hands from the isopropyl alcohol )
• 80% isopropyl alcohol
( or mild dishwashing detergent and water )
• Rubber cement eraser
( or belt sander dressing block may be used )
• Several 100% cotton terry cloths
( best for lint free cleaning )
C A U T IO N
U se only isopropyl alcoh ol or rub ber cem en t
eraser to clean the rollers. H arsh chem icals
like toluene, acetone, or M E K can destroy
the silicone covering of the rolls.
Cleaning the rollers
C A U T IO N
O nly the person cleanin g the rollers m ay
control the fun ction of th e m achin e.