Servicing
Titan 165/ 110 Technical Service Manual
Page 1 - 5
© GBC Films Group October 2000
1.3 Clean the cabinets and
covers
ELECTRICAL
S H O C K
Remove power from the laminator before
cleaning. You can be severely shocked,
electrocuted or cause a fire.
a) Use a damp cotton terry cloth ( water only ),
clean the exterior of the laminator.
b) If water is not strong enough, you may use a mild
dishwashing detergent with water and a cotton
terry cloth.
ELECTRICAL
S H O C K
Do not use liquid or aerosol cleaners on the
laminator. Do not spill liquid of any kind on
the laminator. You can be severely shocked,
electrocuted or cause a fire. Use only a damp
cloth for cleaning unless other wise
specified.
1.4 Cleaning the control
panel
ELECTRICAL
S H O C K
Remove power from the laminator before
cleaning. You can be severely shocked,
electrocuted or cause a fire.
a) Use only a slightly damp ( water only ) non abrasive
cloth.
b) The same type of cloth used to clean eye glasses
may be used instead.
ELECTRICAL
S H O C K
Do not use liquid or aerosol cleaners on the
laminator. Do not spill liquid of any kind on
the laminator. You can be severely shocked,
electrocuted or cause a fire. Use only a damp
cloth for cleaning unless other wise
specified.