Chapter 4 – Smoke Control Section, Page 4-30__________________________________________________
Smoke Control – Troubleshooting (Cont.)
Replacing the Ionizing Wires
To replace an Ionizing Wire place the Cell on a work bench and proceed as follows:
1.
Remove all of the broken wires from the Cell mounting brackets (Refer to Figure
4-30-1).
2.
Install the new wire as follows:
a)
Insert hook of one spring into the hole.
b)
Use long-nose pliers and carefully pull second spring until hook can be secured in mounting
bracket hole.
Figure 4-30-1
Replacing Ionizing Wires
Ionizing Wires
Cell Mounting
Brackets
