__________________________________________________Chapter 4 – Smoke Control Section, Page 4-13
Smoke Control – Maintenance (Cont.)
Cell Rotation Procedure – Cont.
6.
Re-connect the 3 lead wires to the terminals on the Outer Cell. Close the Cell and Electrical
Compartment doors.
7.
Place the dirty Cells in the soak tanks. Fill with hot water and add Formula G-510EF at a ratio of one
part detergent to ten parts water. Leave the Cell in the tank until the next rotation.
Figure 4-13-1
Outer Cell
End View
Figure 4-13-2
Inner Cell
End View
Cell Terminals
Spring Terminals
