Gateway P-79, Service Manual

Page: 124 / 198

CHAPTER 3: Replacing notebook components
118
8
Disconnect the cable and remove the old Bluetooth module from the notebook.
9
Connect the cable to the new Bluetooth module.
10
Place the new Bluetooth module into the notebook.
11
Replace the palm rest by following the steps in “Replacing the palm rest” on
page 104 .
12
Replace the LCD assembly by following the steps in “Replacing the LCD assembly”
on page 90 .
13
Replace the keyboard by following the steps in “Replacing the keyboard” on
page 78 .
14
Replace the keyboard cover by following the steps in “Replacing the keyboard
cover” on page 75 .
15
Replace the hard drive by following the steps in “Replacing the hard drive” on
page 69 .
16
If the notebook has wireless networking built in, reconnect the wireless antennas
by following the steps in
“Replacing the IEEE 802.11 wireless card” on page 65 .
17
Replace the wireless bay cover by following the steps in “Replacing the IEEE 802.11
wireless card” on page 65 .
Important
The Bluetooth module is glued to a foam. Only remove the Bluetooth
module if it is defective. Remember to glue the new Bluetooth module to the foam.