Gateway E-842R, User Manual

Page: 70 / 164

CHAPTER 5: SAN LUN Mapping www.gateway.com
64
Overview of the SAN LUN mapping window
The following illustration provides an explanation of each component of the
SAN LUN Mapping window. A graphical illustration of the physical connection
from the Host HBA Port to the storage enclosure is provided to help you visualize
the topology being mapped.
The SAN LUN Mapping window is divided into two primary sections. The first
section on the left side of the window encompassed in the box titled
Topology
Information displays the list of discovered Host HBAs and the current mappings
for that selected port name. The second section displayed on the right side of
the window is for adding, modifying, and deleting SAN LUN mappings.
HBA Ports Name section
This section provides a list of the discovered named and unnamed fibre channel
HBA Ports.
You must select a port and identify it in the Name Host section on the right side
of the window to perform the mapping. After you identify the port, it is helpful
to rename it to a user defined name.
To rename an HBA port:
1
Click on an unnamed port from the list of the discovered, unnamed/
named fibre channel HBA ports in the
HBA Ports Name section, then
identify it using the displayed HBA Node WWN and HBA Port WWN under
the
Name Host section on the right side of the window.
2
Enter a name for the port in the Name Host section, then click ASSIGN
NAME .