Gateway 3-Bay mBTX Pro, User Manual

Page: 140 / 184

CHAPTER 12: Adding and Replacing Components
134
2
Remove the bezel by following the instructions in “Removing the front bezel” on page 124 .
3
Disconnect the cable from the I/O panel.
4
Remove the screw that secures the I/O panel to the computer, then remove the I/O panel
from the computer.
5
Position the new I/O panel on the front of the computer, then replace the screw.
6
Connect the I/O panel cable to the new I/O panel.
7
Replace the metal reinforcing beam/hard drive assembly, being careful not to pinch the
hard drive cables, then replace the bezel.
8
Replace the side panel by following the instructions in “Replacing the side panel” on
page 126 .
Replacing the hard drive
To replace a hard drive:
1
Back up any files that you need on the drive you are replacing to another drive or on
removable media.
2
Print “Recovering your system” on page 110 for use in Step 13 .
3
Remove the side panel by following the instructions in “Removing the side panel” on
page 122 .
4
Remove the bezel by following the instructions in “Removing the front bezel” on page 124 .
Caution
Be careful not to pull or damage the hard drive power and data cables when
you remove the metal reinforcing beam/hard drive assembly.
Screw