C300/C500 Setup
Page 33
Seal Check
Seal Check Manual.
Follow the procedures in the Seal Check manual for verifying
integrity of the housing.
NOTE.
Ensure the fitting plug is installed prior to submersion! Failure to do so will
result in a wet camera.
Video Connections (Optional)
If you have the HD-SDI option installed, no special camera setup is required. You need
only connect the HD-SDI surface feed cable to the bulkhead connector as shown in the
photo. Refer to the HD-SDI Addendum document for further information.
The Seal Check fitting is located
to the right of the Magnified
Viewfinder.
HD-SDI Surface Feed
cable (optional)
Note: DEEP EPIC shown
