C300/C500 Setup
Page 14
Check Front Shell Controls.
This is a good time to verify operation of all Front
Shell controls. Push in each control on the left side, confirming that the control
touches and operates the associated camera function (see Section 3 Controls for
more information).
CAUTION: AVOID OBSTRUCTIONS.
The camera should insert freely, without
obstruction. If obstructions or resistance are encountered, stop. Remove the
camera, find the cause of the obstruction, and try again.
Tighten the
thumbscrews by hand,
then with the 3/16 ball
driver.
Push in each control and verify
camera function.
