C300/C500 Setup
Page 20
The alarm can be tested anytime by shorting the detection contacts that lead to the
water alarm transducer. The water detection condition will activate for 6 seconds. If the
battery is drained the low battery condition will sound.
The water alarm requires a single 6V battery like Radio Shack model 23-469 or A544.
Your battery should be removed when stored (e.g. between dive trips). Check the
battery prior to every die to ensure proper operation. Change when indicated.
CAUTION
: You must wait a minimum of 30 seconds between battery insertions to allow
the unit to fully discharge.
Water Alarm siren and
battery installed into the
Rear Shell
Water Alarm LED will
illuminate here in the
corner of the rear window.
Window Mask. Remove
three screws and the mask
if using the Gemini RAW
recorder (see next section).
