C300/C500 Setup
Page 29
Housing Closure
General.
The Rear Shell slides from the rear over the foot rails, over the camera
and mates with the Front Shell. If there is obstruction at any time during this
process – stop! – remove the shell and locate the obstruction.
Tilt Camera Viewfinder.
The Magnified Viewfinder on the C300/C500 housing will
work with the camera viewfinder unit tilted between zero and 15°, which is optimal.
Pull out the camera viewfinder fully, and tilt as desired.
Mount Trim Weights.
Mount trim weights to the interior of the shell. Refer to the
‘Buoyancy Adjustment’ section below for more details.
Pull out and tilt the camera viewfinder unit
15° for optimal viewing on the C300/C500
housing Magnified Viewfinder.
