C300/C500 Setup
Page 21
Gemini RAW External Recorder (Optional)
The Gates C300 / C500 integrates the Convergent Design Gemini RAW external
recorder into the housing specifically to support 4K RAW recording from the EOS-C500
camera.
Purchase, technical and warranty support for the Gemini RAW are provided directly by
Convergent Design. (
http://cd.contentpros.org/Products/GeminiRAW.aspx
).
An optional mounting and connection kit for the Gemini RAW is available from Gates.
Installation of this Gemini RAW to the C300 / C500 housing follows.
Remove Window Mask.
If installed, remove the window mask (see illustration in
previous section ‘Water Alarm’.
Attach brackets to Gemini RAW.
Two brackets – one on the left, one on the right
– attach to the Gemini RAW as shown. Three M3x10 and one M3x16 screws are in
the kit for this purpose.
Attach the battery holder.
The battery holder is secured to the bottom of the
Gemini RAW as shown.
Battery Holder. Secure
with ¼-20 thumbscrew.
Secure brackets to Gemini
RAW with M3 Screws.
Note one M3 screw is
longer than the others.
Gemini RAW Recorder
