C300/C500 Setup
Page 26
Front Bulkhead, Port and Port Ring
Inspection.
Before installing the Front Bulkhead, Port Ring and Port, visually
inspect the o-rings for dirt or other foreign matter that may compromise the seals.
Do the same with the Front Shell face (where the Front Bulkhead mates) and Port
bore where the o-rings seal.
See the separate document “Housing Care and
Maintenance Guide” for more details.
NOTE:
Some lenses do not require a Port Ring. Refer to Gates Lens Compatibility
Matrix for details.
CAUTION
: Do Not lubricate
the ORANGE Front Bulkhead o-ring. It is silicone
material and lubricant may cause damage.
Only the BLACK and YELLOW o-rings
are safe to lubricate.
Install the Front Bulkhead.
Position the Port Extender over the entire lens / LGD’s
and secure to the front bulkhead with 4 screws. Tighten the 4 screws firmly.
Install Front Bulkhead with
4 screws and washers.
Tighten firmly.
