C300/C500 Setup
Page 22
Mount Gemini RAW assembly to Camera Mount.
A special pivot bolt is provided
to mount the Gemini RAW assembly to the Camera Mount, as shown in the
illustration.
Insert Charged Battery.
Set a charged battery into the holder as shown. The
battery wires should exit the holder slot to the lower right of the illustration.
Connect Power.
A connector on the end of the battery wires will mate with one
from the switch. Mate the other connector from the switch to power input on Gemini
RAW.
Pivot Bolt mounts the
Gemini RAW to the
Camera Mount. Use the
1/8” hex tool to tighten
securely.
Insert LiOn battery into the
holder as shown. The
battery wires exit the
battery holder slot here.
Connect Power to Gemini
RAW here.
Record
/ Stop
Gemini
Power
Switch.
