57
• Always place the appliance on a clean, dry and stable surface where
it is protected from inadmissible strain (i.e. mechanical or electric
shock, overheating, frost, moisture) and where young children can-
not reach it. Do not place the appliance near the edge of a bench
or table during operation. Vibration during operation may cause the
appliance to move.
• Operate the appliance on a well accessible, stable, level, dry, and
suitable large surface. Do not place the appliance or any part of it on
or near hot surfaces (heater, gas burner, grill, or oven). Do not place
the appliance near the edge of the table or counter or on inclined
or wet surfaces or where it can fall. Keep the entire appliance away
from direct sunlight and sharp edges. Ensure the blender jug is locked
securely onto the motorblock and that you can not knock the appli-
ance over during operation to avoid personal injury. Do not place
the appliance on a metal surfaces for example, a sink drain board.
• Never place the appliance or the jug of the appliance on the edge
of the work surface. Please ensure that the appliance can not tip over.
Always place the jug on clean, smooth surfaces. Dirt and sand can
also damage the lock in the socket.
• Never leave the appliance unattended when the plug is connected to
the power outlet. Always IMMEDIATELY turn the appliance off, wait
for the motor to stop completely, and then unplug the appliance, if
the appliance is not in use (even for a short break) and before assem-
bling, disassembling or cleaning. Never leave the appliance unatten-
ded when in operational mode.
• Do not leave any food dry on the surfaces of the appliance. Do
not immerse the motor housing or power cord in water or any other
liquid. Do not pour or drip any liquids on the motor housing or power
cord. When liquids are spilled on the motor housing, immediate-
ly unplug the appliance and dry the motor housing to avoid risk of
electric shock or fire. Do not attempt to operate the appliance, when
liquids are on or in the motor housing.
• Do not place the motorblock in an automatic dishwasher!
• To avoid damage, do not use any abrasive cleaners, corrosive che-
