99
CLEANING THE BURRS
Regular cleaning helps the burrs achieve con-
sistent grinding results which is especially
important when grinding for espressi.
Necessary tools: burr brush with tamping fan
removal magnet at the handle, grinder outlet
brush.
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
MENU
EXIT
13
1
2
3
4
5
6
7
88
9
10
11
12
14
15
1. Remove the lid of the bean hopper and
turn the lock in the middle of the bean
hopper counterclockwise to unlock.
Remove the bean hopper.
2. Pour out the coffee beans.
3. Replace the bean hopper and turn the
bean hopper lock clockwise to lock it.
4. Place the portafilter on the grind outlet
and turn it to the lock position to run the
grinder until it is empty.
5. Remove portafilter and bean hopper.
6. Grasp the upper burr by the grip and turn
the upper burr counterclockwise to unlock
it. Pull the upper burr out.
7. With the lower burr still in place, clean
both burrs with the burr brush.
8. Insert the tamping fan removal magnet
from below into the grind outlet until it
clings to the tamping fan. Pull the tamping
fan downwards and out.
9. Clean the grind outlet and tamping fan
with the grind outlet brush.
10. Replace the tamping fan by hand.
11. Push the upper burr firmly into position
and turn it clockwise to lock it.
12. Replace the bean hopper and turn the
lock clockwise.
CLEANING THE STEAM WAND
WARNING – Risk of Burns:
During use
and even shortly thereafter, hot water and
steam could escape from the steam wand and
the steam wand tip will be hot. Do not hold
your hands or any delicate objects beneath
or near the steam wand with the appliance
still hot. Ensure that the steam wand always
points to the drip tray, when not in use.
Immediately after Use
Note:
After every use, thoroughly wipe the steam
wand and tip with a damp cloth and purge
immediately. Otherwise, the milk texturing
performance may be affected.
WARNING:
The automatic purge func-
tion of the steam wand will produce some
short steam blasts, when the steam wand is
lowered. This is for cleaning the openings in
the tip. Ensure not to get burned!
1. Ensure the steam lever is in the centre
OFF position.
2. Wipe the tip of the steam wand using a
soft damp cloth, taking care not to touch
the steam wand tip with your skin. There-
after, while ensuring to keep your hands
away from the steam wand tip, by the
handle move the steam wand over the drip
tray. The appliance will produce some
short steam blasts to purge remaining milk
from the holes in the steam wand tip.
Remove Obstacles from the Holes of
the Steam Wand
Note:
Even partially blocked holes may affect the
ability of the steam wand to produce suffi-
cient foam volume.
1. Ensure the steam lever is in the centre OFF
position, and switch OFF the appliance
(press POWER button). By the handle, lift
the steam wand to the upper position.
