82
83
2. Insert the portafilter into the group head.
3. Position your cup so the portafilter spouts
and hot water outlet are directed inside
the cup.
4. Press the MENU button. Rotate the SELECT
dial, until ‘LONG BLACK ADJUST’ is flas-
hing on the LCD display. Then press the
SELECT dial.
NOT PROGRAMMED
PROGRAMMED
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
UC T
PROGRAMMED
+
POWER
5. Rotate the SELECT dial to the parame-
ter set you’d like to program (“Set 1” to
“Set 6”). Parameter sets that have alrea-
dy been programmed will display a cup
icon.
NOT PROGRAMMED
PROGRAMMED
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
UC T
PROGRAMMED
+
POWER
6. Press the SELECT dial to enter the current-
ly shown parameter set. The LCD display
will show a moving cup icon and espres-
so will extract from the portafilter spouts.
7. When the required amount of coffee has
been extracted, press the SELECT dial to
stop the flow of espresso and start the
flow of hot water.
8. When the required amount of water has
poured, press the SELECT dial to stop the
flow of hot water. The LCD display will
show a cup icon and the Espresso Machi-
ne will beep to confirm that your custo-
mized Long Black settings have been pro-
grammed. The Espresso Machine returns
to standby mode.
To Use Your Custom Long Black Setting
9. Rotate the LONG BLACK dial. Your pro-
grammed custom Long Black setting will
appear after the pre-set small, medium
and large settings. See: ›Preparing a
Long Black‹.
10. Press the LONG BLACK dial and your pro-
grammed Long Black setting will dispense.
Note:
Custom Long Black settings can be re-pro-
grammed by following the above steps 1-8.
ADVANCED SETTINGS
rSEt
Reset default settings
dESc
Descaling the water system
SEt
Select the temperature unit
LCD
Backlight (LCD)
SPOt
Spotlights
StEA
Setting the steam temperature
Air
Air pump delay
Snd
Setting the volume of the acoustic
signals
FAn
Fan control
Cln
Enable (A On) or disable (A OF)
the cleaning message
CLoC
Selecting clock format
vOL
Selecting the type of shot control
(volume or time duration)
To Access Advanced Features
1. With the Espresso Machine turned off,
press and hold the 1 CUP button, then
press and hold the POWER button toge-
ther for 3 seconds.
