GAS BreathSpec, User Manual

Page: 224 / 242

BreathSpec®
– User Manual
224/242
Action Repeat the procedure. Restart the system and repeat the
procedure. Check write protection of the USB-Stick. Ensure
that the USB-Stick is FAT32 formatted. Reformat the USB-
Stick. Replace the USB-Stick with a new one. Repeat the
procedure. If that still does not help contact the G.A.S.
service hotline.
Error message Do you really want to relabel loop volume? It will be
stored in all following measurements.
Description Sample loop setting is change manually.
Action Confirm or abort the dialog.
Error message Can't set static ip!
Description Setup of the static IP-address failed.
Action Check the network settings. Contact your adminstrator.
Repeat the procedure. If that still does not help contact the
G.A.S. service hotline.
Error message Can't request DHCP:
Description Setup of the dynmaic IP-address failed.
Action Check the network settings. Check DHCP-server. Contact
your adminstrator. Repeat the procedure. If that still does not
help contact the G.A.S. service hotline.
Error message Valve set to Inject. Loop not filled
Description
Valve setting is set to position “Inject” and not to “Fill loop”.
Sample loop could not be filled.
Action Abort program and set valve to
position „Fill loop“ manually.
Error message Trigger recieved while running program.
Description During the program run a new trigger signal will be received.
The program run is aborted.