GAS GAS Enduro Series, Workshop Manual

Page: 24 / 72

Workshop manual
-24-
- Extract the screws (1) by loosening them in a diagonal sequence.
- Remove the clutch springs and pusher bushings.
- Detach the clutch press (2)
- Extract the clutch disc assembly from the basket.
- Open the safety (1) on the fixing nut of the clutch hub (2).
- Loosen the nut by holding the clutch hub.
Attention:
Theclutchhubnutloosenstotheleft!
- Remove the sealing washer and detach the clutch hub.
Note:
Theclutchhubhasafittingpositionrelativetotheprimaryshaft.
Markthispositionwithanindeliblemarkeronthegreasingpoint.
- Remove the washer from the clutch basket.
- Detach the clutch basket.
- Remove the bearings from the clutch basket (1), bushing (2) and washer (3).
1
1
1
1
2
1
1
2
1
Dismantling the engine
1
2
3