GAS GAS Enduro Series, Workshop Manual, Page: 22 / 72

Workshop manual
-22-
- Extract the fixing screws (1) from the centrifuge cam holder.
- Extract the exhaust valve ball joint pin clip (2).
- Loosen the screws of the cylinder head (1) in a diagonal sequence and remove
it from the cylinder.
Note:
Ifthecylinderheaddoesnotcomeouteasily,tapitwithaplasticmallet.
- Remove the inner and outer O-rings from the cylinder head.
- Extract the screws (arrows) from the left-hand exhaust valve cover.
Dismantling the engine
2
1
1
1
1
1
1
1
1