GAS GAS Enduro Series, Workshop Manual

Page: 7 / 72

Workshop manual
-7-
*(A) NUT *(B) SCREW
GENERAL TIGHTENING TORQUES
Nm Kgf.m Ft.lb
10 mm 6 mm 6 0.6 4.3
12 mm 8 mm 15 1.5 11
14 mm 10 mm 30 3.0 22
17 mm 12 mm 55 5.5 40
19 mm 14 mm 85 8.5 61
22 mm 26 mm 130 13.0 94
*A: Distance between the planes of the nut.
*B: External diameter of the screw thread.
ENGINE IDENTIFICATION
- The engine serial number is stamped on the bottom of the left-hand semi-
crankcase.
- Always quote the engine serial number when ordering an original GG spare
part for the engine.
GeNeRal INfORmaTION