GAS GAS Enduro Series, Workshop Manual

Page: 25 / 72

Workshop manual
-25-
REMOVING THE EXHAUST VALVE CENTRIFUGAL DRIVE SYSTEM
- Extract the screws (arrows) and remove the bracket (1) from the exhaust valve
control shaft.
- Detach the exhaust valve centrifugal drive (2).
REMOVING THE KICK-START SPROCKET ASSEMBLY
- Remove the spring (1) with a pair of pliers and detach the kick-start sprocket
assembly.
- Extract the retaining ring (2), remove the spacer washer and detach the inner
starter sprocket.
REMOVING THE GEAR SELECTOR ASSEMBLY
- Remove the entire selector shaft (arrow) by pulling it outwards.
Dismantling the engine
1
2
1
2