ANITA ©
9
A. Fill the lubricant up to the "HIGH" mark. (See Fig. 5)
B. The lubricant must be Garudan´s oil provided exclusively for industrial sewing machines or
SHELL´s Tellus C10.
C. If the oil in use is down to the "LOW" mark, fill in to "HIGH" immediately.
D. Once every two weeks is deemed the appropriate interval for oil refills.
(Fig.5)
3.6) Belt Tension Adjustment
Sufficient loosening of the fixed nuts (1), (2) after motor (3) installation would create tension to the
belt (4). Tighten the fixed nut (1) first and then tighten the fixed nut (2) to an unmovable position.
(See Fig. 6)
(Fig.6)
3.7) Program Unit
A. Installing automatic knee-lifting solenoid on machine head
Use five fixing screws (4) to attach the solenoid on the back side of machine head. (See Fig. 7)
B. Assembling of back cover
When the machine is equiped by manual knee-lifter, fasten the bracket tightly using the three fixing
screws in the back lid of the machine. (See Fig. 8)
C. Assembling of control panel
Use four fixing screws to fix the bracket (2) onto the control panel. Using the two screws (4) to
attach the assembly on the top of machine head. (See Fig. 7, 8)
Summary of Contents for GF-1116 Series
Page 30: ...ANITA 30...
