Garudan GF-1116 Series, User Manual, Page: 18 / 30

ANITA ©
18
(See Fig. 24)
(Fig. 24)
►After disassembling and adjusting a safety device, always place it back to
Caution the original position and check whether it functions as intended.
►Use both hands when pushing the machine backward or returning it to the
original position. Due to the weght of the machine your hand can get stuck in
the machine if you should slip.
►When adjusting the machine with the switch on, be sure to pay extreme
caution.
►Only trained engineers must perform troubleshooting or inspection of the
machine.
►For electrical repair or inspection, consult with qualified technicians or
agent.
4.9) Height and Tension Adjustment of Presser Foot
1. As in Fig. 25, remove the rubber plug (2) in the face plate and place the presser foot (3) on the
needle plate. Then, loosen the presser bar fixing screw (4) and adjust the height of the presser bar.
The presser foot (3) will fall when the presser bar is lifted and rise when the presser bar is moved
down. Move the presser foot lifter (5) manually to place the bottom face of the presser foot 5,5mm
above the top face of the needle plate and tighten the presser bar fixing screws firmly.
(Fig. 25)
!