EN
31
End User Instruction
Congratulations on selecting a GARO GLB-Wallbox and contributing to a better environment. The
GARO GLB Wallbox is an AC charge-station enabling Mode 3 charging which complies fully with the
requirements of IEC 61851-1 and IEC TS 61439-7. The product complies with IP Code IP44, with a
closed front.
It is to be fitted to a wall or GARO Wallbox stand, and all installation must be carried out by an
authorized installer and comply with local country installation regulations.
NOTE! Read all safety information before you start to use the GLB Wallbox
END USER INSTRUCTION
Charging electric vehicles
1. Connect the GLB-Wallbox to the vehicle using the cable.
2. When charging starts, shifting blue light intensity indicates charging in progress.
3. Stop charging. As a rule, the GLB-Wallbox socket and vehicle inlet locks the cable. As a result,
charging must be stopped from the vehicle before the cable is removed. Terminate charging
according to the vehicles instruction manual, removing connector from car before removing
connector at charger end.
4. After terminated charging, make sure cable is suspended.
Important information:
• It is your EV that decide how much energy the Wallbox deliver to the EV.
• The GLB Wallbox can deliver max the kW according to the GLB-Wallbox rating label.
• The EV also check the capacity of the charging cable that you use, and never exceed the capacity
of the charging-cable.
If your GLB wallbox is equipped with a socket, it is important to use the right type of cable. For
example, to charge at 32A, a 32A cable is required. There are both 1-phase and 3-phase cables on
the market, make sure you use correct type for your EV.
