NRI Grazing Land On-Site Data Collection
(03/23/20011) B-4
Map 76 Interface Keys
POWER
/backlight key (light bulb) – Press and hold to power up the Map76. Press
again to activate the backlight.
QUIT
– Press this key to exit a function or go back a page.
NAV (MOB)
– Press this key to begin navigation function. When the NAV key is
pressed and held it records a Man Overboard (MOB) point that stores the current
location and commences navigation back to that point.
ZOOM IN
– Press this key while viewing a map to zoom in (enlarge).
ZOOM OUT
– Press this key while viewing a map to zoom out (reduce).
PAGE
– Press this key to move between primary display pages.
MENU
– Press this key twice to access the main menu. Press once to display page
option menus.
ENTER
– Press this key to activate a data field or confirm a selection. Press and hold
to capture a waypoint.
ROCKER
– Use this key to move between fields and between field place holders
within fields. The ROCKER key moves left, right, up, and down.
ROCKER Key
The ROCKER key is used to move from scroll up and down lists in menus.
It is also used to move from field to field on a setup page.
Individual settings can be adjusted by pressing the ENTER key to activate a field then
pressing left/right ROCKER to move left or right - character to character.
Pressing up/down ROCKER lets you change a number or letter for a particular
character entry.
See Manual, pg. 10.
POWER Key, First Press
Press and hold the POWER key (red light bulb icon on left side of the keypad) until
you see the first startup page.
2
3
