NRI Grazing Land On-Site Data Collection
(03/23/20011) B-3
Connect the antenna by grasping the MCX connector between your thumb and index
finger and gently pushing the connector straight into the port. Remove the connector by
gently pulling it straight out. Never twist the connector while inserting it into or
removing it from the port.
The battery compartment is found in the middle of the receiver. Lift, twist, and pull
the D-ring to remove the flap covering both the battery compartment and the
power/data port. Be sure batteries are oriented according to the guides etched on the
inside of the compartment. Use two fresh AA batteries from the same pack each time
you change batteries.
The power/data port is located near the bottom of the back side – insert Garmin
power adapter or PC data 4-pin plugs by aligning the slot on the plug with the raised
key on the inner wall of the port.
2
3
1
2
