NRI Grazing Land On-Site Data Collection
(03/23/20011) B-15
The memory indicator gauge at the bottom center of the page tells you how much
memory is available for waypoints and tracks.
A battery in the lower right corner tells you the unit is operating on battery power
only.
The battery symbol works like a gauge – you can see how much power is left by
seeing how “full” the battery is (darkened area).
A plug in the lower right corner means the Map76 is connected to and powered by an
external power source.
There is no way to know how “full” an external battery is by looking at this icon.
See Manual Pg. 37.
Accessing the Setup Menu
Scroll down the Menu page until “Setup” is highlighted, then press the ENTER key.
You will be taken to the first setup tab.
Making changes to settings
Use the ROCKER key to move to an option field, then press the ENTER key to
access the options for that field.
Use the ROCKER key to scroll through choice lists then press ENTER to lock in the
choice.
Press ENTER on a numeric field to enable editing. Use the ROCKER key to scroll
up and down lists of integers.
Press ENTER to lock in the integer choice.
See Manual Pg. 56.
General Tab Options
The „General Tab‟ has settings for the receiver Mode, WAAS, Backlight Timeout, and
Beeper.
