Garmin GPS Map 76 Manual Download Page 19 | Manualshive

Page: 19 / 28

background image

NRI Grazing Land On-Site Data Collection

(03/23/20011) B-19

The Units tab contains settings for Elevation, Depth, Distance/Speed, Temperature,
Direction Display, and Speed Filter.

These settings are used in related data fields throughout the unit.

Elevation

–

Choose from Feet or Meters in height above Mean Sea Level.

Depth

– Choose from Feet, Fathoms (one fathom equals six feet), or Meters for depth

below sea level.
The depth input comes from a depth sounding device that outputs National Marine
Electronic Association (NMEA) sentences.
Not relevant to most NRCS activities.

Distance and Speed

–

Choose from Nautical, Statute (English), or Meters. This setting

will be used in all data fields relating to speed or distance.

Temperature

–

Choose from Fahrenheit (English) or Celsius (Metric) degrees. The

Map76 accepts NMEA formatted temperature data from over-the-side instruments. Not
really relevant to NRCS programs and activities.

Direction Display

–

Choose from Cardinal Letters or Numeric Degrees.

This setting will be used in all data fields relating to direction in the receiver.
Mils are another type of angular unit. One degree equals 0.05625 mils.

«
...
17
18
19
20
21
...
»

Summary of Contents for GPS Map 76





























Reviews:

No comments

Related manuals for GPS Map 76

Brand: Danfoss Pages: 12

Brand: QFX Pages: 2

Brand: Zenith Pages: 8

IMPERIAL HD 2 basic

Brand: DigitalBox Pages: 96

SG Security Communications MLR2-DG

Brand: Sur-Gard Pages: 60

Brand: Yaesu Pages: 20

Harman Kardon AVR 254

Brand: Harman Pages: 2

Brand: Sealey Pages: 2

LBT-PAR02 Series

Brand: Elecom Pages: 2

Digital SAT-Receiver

Brand: Camos Pages: 44

Brand: Sachtler Pages: 12

Brand: Xantech Pages: 4

Brand: Planet Audio Pages: 24

Brand: Rolls Pages: 4

Brand: Denver Pages: 8

Brand: Trevi Pages: 44

Multimedia Manager PXA-H900

Brand: Alpine Pages: 19

LinkBridge LBC-HDBT-R-DG

Brand: Broadata Communications Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands