Garmin GNS 480 Pilot'S Manual Download Page 4 | Manualshive

Page: 4 / 160

background image

ii

Introduction

CAUTION: The Garmin GNS 480 does not contain any user-serviceable parts. Repairs should

only be made by an authorized Garmin service center. Unauthorized repairs or modifications
could void your warranty and authority to operate this device under FCC Part 15 regulations.

CAUTION: The electronic chart is an aid to navigation and is designed to facilitate the use of

authorized government charts, not replace them. Only official government charts and notices
to mariners contain all information needed for save navigation – and, as always, the user is
responsible for their prudent use.

Congratulations on choosing the world’s finest panel-mounted GPS IFR navigation/communication system
certified for primary navigation! The GNS 480 represents Garmin’s continued commitment to providing you
with the most advanced technology available today — in an accurate, easy-to-use design suitable for all your
flying needs.
Before installing and getting started with your new system, please ensure that your package includes the fol-
lowing items. If any parts are missing or are damaged, please contact your Garmin dealer.

Standard Package:

•  GNS 480 Unit and NavData Card
•  Mounting Tube and Installation Kit
•  Pilot’s Guide and Quick Reference Guide
•  GNS 480 Interactive Training CD
•  Database Subscription Packet
•  Warranty Registration Card
•  *

GPS Antenna kit is available as a separate option selected at the time of order

Your Garmin dealer will perform the installation and configuration of your new GNS 480. After installation,
the NavData card will already be installed into the unit. The GNS 480 will be secured in the mounting tube
with the proper wiring connections. Have your dealer answer any questions you may have about the installa-
tion — such as location of antennas or any connections to other equipment in the panel.

Accessories and Packing List

To obtain accessories for your GNS 480 please
contact your Garmin dealer.
Help us better support you by completing our on-line
registration form today! Registration ensures that you
will be notified of product updates and new products
and provides lost or stolen unit tracking. Please, have
the serial number of your GNS 480 handy, connect to
our web site (

www.garmin.com

) and look for our

Product Registration link on the home page.
The GNS 480 display lens is coated with a special
anti-reflective coating which is very sensitive to
skin oils, waxes, and abrasive cleaners. It is very
important to clean the lens using an eyeglass cleaner
that is specified as safe for anti-reflective coatings
(one suitable product is Wal-Mart Lens Cleaner) and
a clean, lint-free cloth.

«
...
2
3
4
5
6
...
»

Summary of Contents for GNS 480

































































































































































Reviews:

No comments

Related manuals for GNS 480

Brand: Raven Pages: 28

Brand: Ravencourt Pages: 10

Brand: Mongoose Pages: 16

Brand: Mongoose Pages: 16

Brand: Morbella Pages: 61

Brand: LXNAV Pages: 110

Brand: PDQLogic Pages: 66

Brand: SkyCaddie Pages: 31

Brand: Dbworth Pages: 15

Brand: Spytec Pages: 28

Brand: Alcatel Pages: 21

Brand: Alcatel Pages: 31

Brand: SMI Pages: 176

Brand: Falcon Pages: 25

Brand: Leadtek Pages: 20

Brand: Raymarine Pages: 24

Brand: Garmin Pages: 50

GPSMAP 3206 - Marine GPS Receiver

Brand: Garmin Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands