Garmin GNS 480 Pilot'S Manual Download Page 136 | Manualshive

Page: 136 / 160

background image

128

Basic Operation

Traffic (TFC)

The GNS 480 displays traffic when the GTX 33/330 Transponder or Skywatch system are configured with the
GNS 480. When available, the Traffic function is reached by pressing the

FN

key and then the

TFC

function

smart key. Traffic is displayed relative to the latest reported position. The relative altitude of the traffic from
your aircraft is shown as above (+) or below (-) in hundreds of feet. An altitude that is invalid is shown by
three dashes below the symbol. An arrow next to the altitude value shows the direction of traffic that is climb-
ing or descending at a rate greater than 500 fpm. See your traffic sensor documentation for more details on
symbols and other attributes of your particular system.
A Traffic pop-up screen will appear on any other page when a traffic advisory condition occurs.
The Map display can also be configured to add traffic as an overlay with the other map selections.

Traffic Display Range Ring

Range rings are used to display relative distances on the display. The current range values are shown on the
lower left edge the rings. The range is changed by turning the

Small

knob. At the 2 nm level only one ring is

displayed.

Traffic Symbols

• Traffic Advisories - filled amber circle outlined in black is positioned to show its relative bearing

and distance to the Traffic advisory aircraft.

• Proximate Traffic - filled cyan diamond. (Skywatch only)

• Other Traffic - cyan diamond outline.

• Traffic Direction Indicator (TIS only) - an indicator line is oriented to the approximate track that

the TIS traffic is flying. Direction data is provided in 45° increments.

Traffic Mode Display

Traffic Alert Pop-Up Overlay

Traffic Overlay in Map Mode

Traffic

ç

«
...
134
135
136
137
138
...
»

Summary of Contents for GNS 480

































































































































































Reviews:

No comments

Related manuals for GNS 480

Brand: Garmin Pages: 4

Brand: Roadragon Pages: 12

Brand: Acute Pages: 13

Brand: Garmin Pages: 80

Brand: ATP Electronics Pages: 20

GPSMAP 162 Sounder

Brand: Garmin Pages: 99

Brand: XAiOX Pages: 13

Brand: EMTAC Pages: 37

Brand: Teltonica Pages: 37

Rear View Safety RVS-780

Brand: Safe Fleet Pages: 20

Brand: RedKnows Pages: 21

Brand: Micron Electronics Pages: 10

Brand: SMI Pages: 176

Brand: FALCOM Pages: 50

Brand: GalileoSky Pages: 77

MAP330 - MapSend CD For Meridian

Brand: Magellan Pages: 94

Brand: Navman Pages: 123

Brand: Garmin Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands