118
Basic Operation
Parallel Track (PTK)
The Parallel Track (PTK) function allows you to create a parallel course offset of 1 to 99 NM to the left or right
of your current flight plan. You must have FROM and TO waypoints defined. Parallel Track cannot be activated
if you set a course using Direct-To or if the active leg is the first leg of the departure procedure, or the Initial Ap-
proach Fix (IAF) has been passed. Attempting to activate Parallel Track with these conditions results in the mes-
sage “Cannot Activate Parallel Track for Current Leg.” Choose Left or Right of the current course, and the offset
distance. When Parallel Track is activated, the course line drawn on the Map pages will show the parallel course,
a PTK annunciation will be shown in the lower left corner of the display, and waypoint names will have a lower
case “p” before or after their identifier. Using Direct-To, loading an approach, holding pattern, or editing and
executing your flight plan will automatically cancel Parallel Track. Parallel track is cancelled if a course change
occurs greater than 120° or the parallel tracks overlap as a result of the course change.
Activating Parallel Track
1. Press
FN
and then the
PTK
key to reach the Parallel Track function.
2. Press the
CRSR
knob.
3. Turn the
Small
knob to change the value for the Distance parallel from the flight track. With the
Distance field showing, selections or 1 nm, 2 nm, 3 nm, 5 nm, or 10 nm can be selected by pressing the
appropriate Menu Selection key.
4. Turn the
Large
knob to move between the Distance and the Direction from Track. With the Direction
selection highlighted, turn the
Small
knob to select between Right or Left of Track. When the Direction
field is shown, selections of Right and Left can be selected by pressing the appropriate Menu Selection
key.
5. Press the
Menu/Enter
key or the
CRSR
knob when you are finished making selections.
6. Press the
Activate
or
Standby
key to activate or deactivate the Parallel Track values selected.
Setting Parallel Track Distance
Setting Parallel Track Direction
Parallel Track
Press Activate to use Parallel Track
Summary of Contents for GNS 480
