FLIGHT MANUAL STEMME S12
PAGE: 7-11
DOCUMENT NUMBER
REVISION: --
L400-912816 ISSUEFEBRUARY 21 2020
DATE: --- --, -----
The GPS Status will display one of the following conditions:
•
Autolocate—Receiver is looking for any satellite whose almanac
has been collected, which can take up to 5 minutes
•
Searching the Sky—Receiver is looking for satellites
•
Acquiring Satellites—Receiver is looking for and collecting data
from satellites visible at its last known or initialized location, but has
not acquired a fix
•
2D GPS Location—At least three satellites have been acquired
and a two-dimensional location fix has been calculated. “2D
Differential” appears when you are receiving DGPS corrections in
2D mode
•
3D GPS Location—At least four satellites have been acquired and
a three-dimensional fix has been calculated. “3D Differential”
appears when you are receiving DGPS corrections in 3D mode
•
Lost Satellite Reception—the receiver is no longer tracking enough
satellites for a 2D or 3D fix
To view GPS receiver status information:
•
Turn the large Knob associated with the MFD to select the Info
Page.
or:
•
Touch the Page Navigation Bar on the MFD.
•
Touch the Info Page from the Select Page menu.
7.2.1.6
Secure Digital (SD) Cards
The G3X Touch data card slot uses Secure Digital (SD) cards. The SD card
can be used for software updates, checklist files, flight data logging,
exporting Track Logs/User Waypoints, and Importing/Exporting Flight Plans.
To Install an SD card:
•
Insert the card into the slot at the lower, center, front of the bezel.
Be sure the SD Card contacts are facing downwards.
•
Firmly push the card into the unit. It is not necessary to force the
card.
If you insert an SD Card and get a card format not recognized message,
try removing the card and reinserting it. If the card is still not recognized,
contact Garmin Product Support or your Garmin dealer.
Summary of Contents for G3X Touch
Page 1: ......
