FLIGHT MANUAL STEMME S12
PAGE: 4-15
DOCUMENT NUMBER
REVISION: --
L400-912816 ISSUEFEBRUARY 21 2020
DATE: --- --, ----
4.1.3
Engine Indicating System
The G3X Touch EIS displays engine, electrical, and other system
parameters.
Green bands on the instruments indicate normal ranges of operation;
yellow and red bands indicate caution and warning, respectively. When
unsafe operating conditions occur, the corresponding caution readout will
display solid yellow and the warning readout will flash red. If sensory data
to an instrument becomes invalid or unavailable, a red “X” is displayed
across the instrument.
Information about RPM, Oil Pressure and Oil Temperature is permanently
displayed on the left side of the EIS. Other information is available through
three soft key tabs:
•
Press Main to display information about CHT, Fuel quantity, Fuel Flow
and Fuel Pressure
•
Press Electrical to display information about Main Bus
Voltage/Current and Engine Bus Voltage/Current
•
Press Fuel Calc to display information about Fuel Remaining and
Fuel Used
WARNING
The G3X Touch Fuel Calculator and/or Fuel Range Rings are NOT
intended to be relied upon as the primary fuel indicator(s), and does
not relieve the pilot from the responsibility of proper flight planning. G3X
Touch fuel calculations do not use the aircraft fuel quantity indicators
and are calculated from the last time the fuel was reset.
Summary of Contents for G3X Touch
Page 1: ......