background image

viii 

eTrex Venture Cx and Legend Cx Owner’s Manual

I

NTRODUCTION

 > 

C

AUTION

Failure to avoid the following potentially hazardous 

situations may result in injury or property damage.

Use the eTrex only as a navigational aid. Do not 

attempt to use the eTrex for any purpose requiring 

precise measurement of direction, distance, location, or 

topography. This product should not be used to determine 

ground proximity for aircraft navigation.

The Global Positioning System (GPS) is operated by the 

United States government, which is solely responsible for 

its accuracy and maintenance. The government’s system 

is subject to changes which could affect the accuracy and 

performance of all GPS equipment, including the eTrex. 

Although the eTrex is a precision navigation device, any 

navigation device can be misused or misinterpreted and, 

therefore, become unsafe.

Map Data Information:

 One of the goals of Garmin is to provide customers with the most complete and accurate cartography 

that is available to us at a reasonable cost. We use a combination of governmental and private data sources, which we identify in 

product literature and copyright messages displayed to the consumer. Virtually all data sources contain inaccurate or incomplete 

data to some extent. This is particularly true outside the United States, where complete and accurate digital data is either not 

available or prohibitively expensive. 

NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA

: State law prohibits drivers in California and Minnesota from 

using suction mounts on their windshields while operating motor vehicles. Other Garmin dashboard or friction mounting options 

should be used. Garmin does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of 

disregarding this notice. (See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71.)
The 

California Electronic Waste Recycling Act of 2003

 requires recycling of electronic equipment. Refer to www.erecycle.org. 

Caution

Summary of Contents for eTrex Venture Cx, Legend Cx

































































































Reviews: