Garmin eTrex Venture Cx, Legend Cx Owner'S Manual Download Page 64

Page: 64 / 96

eTrex Venture Cx and Legend Cx Owner’s Manual

AIN

ENU

RACKS

Main Menu

AIN

ENU

The Main Menu contains settings and features not

found on the main pages and sub-menus. The time

and date are shown at the bottom of this page. The

Main Menu is accessible from any page by pressing

Menu

twice. To select an item on the Main Menu,

highlight the menu item, and press

Enter

NOTE:

If a page is added to the sequence, the

icon does not appear on the Main Menu.

Tracks

The Tracks Page shows the percentage of track

memory used, and a list of saved tracks. Use the

Tracks Page to set up, clear, or save a track log, or

enable the TracBack feature for the current track log.

For more information, see page 30.

To access the Tracks Page:

1. Press the

Menu

key twice to open the Main

Menu.

2. Select the

Tracks

icon, and press

Enter

3. Highlight the

Setup

button, and press

Enter

open the Track Log Setup Page.

Tracks Page

Track Log Setup

Summary of Contents for eTrex Venture Cx, Legend Cx

































































































Search results

Summary of Contents for eTrex Venture Cx, Legend Cx

Reviews:

Related manuals for eTrex Venture Cx, Legend Cx

Brands by name

Popular brands

Garmin eTrex Venture Cx, Legend Cx, Owner'S Manual

Search results

Summary of Contents for eTrex Venture Cx, Legend Cx

Reviews:

Related manuals for eTrex Venture Cx, Legend Cx

Brands by name

Popular brands