Garmin Cessna Caravan G1000, Maintenance Manual

Page: 169 / 290

____________________________________________________________________
G1000 System Maintenance Manual Page 5-123
190-00903-00 Rev. A
13.
Remove the SD card from the card reader.
In the Aircraft:
1.
Insert the SD card into the upper card slot of the PFD.
2.
Power up MFD and PFD1 in configuration mode:
•
MASTER Switch (BAT) – On
•
AVIONICS Switch (BUS 1 and BUS 2) – On
3.
Select the SYSTEM UPLOAD page as shown in Figure 5-xx.
4.
Using the FMS knob select the Configuration Files in the AIRFRAME field.
5.
Select the Offset Error Correction File in the FILE field.
6.
Verify the configuration box is checked.
7.
Press the LOAD softkey.
Figure 5-39. Configuration Upload Page
8.
Power down PFD1 and MFD.
9.
AVIONICS Switch (BUS 1 and BUS 2) – Off
10.
MASTER Switch (BAT) – Off
11.
Remove the SD card from the PFD.
12.
Power up MFD and PFD1 in Normal mode:
13.
STBY BATT Switch – Arm
14.
Ensure STBY BATT CB is open
15.
MASTER Switch (BAT) – On
16.
AVIONICS Switch (BUS 1 and BUS 2) – On
17.
Record the BATT S current (in Amps) from the bottom right corner of the EIS strip. Label
this reading as READING #2 and ensure proper sign (+ or -).