____________________________________________________________________
Page 5-98
G1000 System Maintenance Manual
Rev. A
190-00903-00
5.1.8.16
GIA I/O Configuration Page
Figure 5-21. GIA I/O Configuration Page
Discrete and analog input/output channels for GIA 1 and GIA 2 are shown on this page. All
settings are pre-established for a specific installation and are loaded from the G1000 Loader
Card. The settings should not be changed. The ‘GIA1’ and ‘GIA2’ configuration files contain
the settings shown on this page.
Windows:
SELECT GIA UNIT
―
displays the currently selected GIA 63/GIA 63W unit.
SELECT INPUT/OUTPUT
―
displays input/output type that is displayed for the currently
selected GIA.
Options include:
a.
Discrete In
b.
Discrete Out
c.
Analog In
d.
Analog Out
Configuration
―
displays active I/O configuration settings for the currently selected GIA and
input/output type. A green box indicates an input is active, a black/red box indicates an input is
not active or not is use.
Softkeys:
The following softkeys appear on this page.
a.
SET>ACTV: See configuration section for description.
b.
ACTV>SET: See configuration section for description.
