Garmin Beechcraft 200 Series, Cockpit Reference Manual, Page: 98 / 270

Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B 74
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Each visual approach will have two transitions, the straight in transition (STRAIGHT)
and the Vectors-to-Final transition (VECTORS). The visual approach waypoints (fixes)
consist of the initial fix (STRGHT), the final approach fix (FINAL), and the missed ap-
proach point (RWxx). A 3 degree glide path is calculated from the missed approach point
up to each waypoint along the extended straight-in path.
Loading and activating a visual approach using the PROC Key:
1)
Press the
PROC
Key. The ‘Procedures’ Window is displayed.
2)
Highlight ‘Select Approach’, and press the
ENT
Key. The ‘PROC - Approach
Loading’ Page is displayed.
3)
Select the airport and approach:
a)
Use the
FMS
Knob to select an airport, if necessary, and press the
ENT
Key.
b)
Select a visual approach from the list and press the
ENT
Key.
4) Select a transition and press the ENT Key.
5) Minimums:
a)
To set ‘Minimums’, turn the small
FMS
Knob to select ‘BARO’, ‘TEMP
COMP’, or ‘RAD ALT’, and press the ENT Key. Turn the small FMS Knob
to select the altitude, and press the ENT Key.
b) If ‘TEMP COMP’ was selected, the cursor moves to the temperature
field. Turn the small
FMS Knob to select the temperature, and press the
ENT
Key.
Or :
To skip setting minimums, press the ENT Key.
6)
Press the
ENT
Key with ‘Load?’ highlighted to load the approach procedure
(‘Load’ is only available if there is no previous approach already loaded in
flight plan); or turn the large
FMS Knob to highlight ‘Activate’ and press the
ENT
Key procedure.
When GPS is not approved for the selected final approach course, the
message ‘-NOT APPROVED FOR GPS - GPS guidance is for monitoring only.
Load approach>’ is displayed. With ‘Yes’ highlighted, press the
ENT
Key.
When a visual approach is selected, the message ‘Obstacle clearance is not
provided for visual approaches’ is displayed. With ‘OK’ highlighted, press
the
ENT
Key.
7)
The message ‘Obstacle clearance is not provided for visual approaches’ is
displayed. Press
ENT
to continue.