Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-02040-01 Rev. B
22
Nav/Com/XPDR/Audio Panel
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
select the crew/passenger positions to receive the music audio. The
CREW ICS
Key is
not shared betweeen the Audio Panels for Blue-Select Mode. The
PASS ICS
Key is shared
betweeen the Audio Panels for Blue-Select Mode.
Selecting any button other than CREW ICS, PASS ICS, TEL, MUS1, or MUS2 will
cancel Blue-Select Mode. Pressing the
VOL/SQ
Knob will also cancel Blue-Select Mode.
After approximately ten seconds with no input, the Blue-Select Mode will automatically
cancel.
BLUETOOTH
®
SETUP (GMA 1360)
Pairing a Bluetooth Device with an Audio Panel
Press and hold the
VOL/SQ
Knob for two seconds. The Bluetooth Annunciator flashes
to indicate the unit is discoverable and the aural message “
Bluetooth discoverable
” is
heard. The Audio Panel will remain discoverable for 90 seconds or until a successful pair
is established.
Assigning an Audio Source to the Bluetooth Device
Press the
TEL
Key, the
MUS1
Key, or the
MUS2
Key until the annunciator turns blue
(the audio from the Bluetooth source will not be heard until this step is complete). The
annunciator cycles OFF-WHITE-BLUE. WHITE selects the wired audio source. BLUE
selects the Bluetooth audio source. The BLUE source assignment will persist through
Bluetooth audio connection disruptions.
NOTE:
The Bluetooth audio can only be assigned to one source per Audio
Panel at a time. Once the Bluetooth audio is assigned to an audio source, the
remaining entertainment audio sources on that Audio Panel will only cycle
between OFF and WHITE.
Bluetooth audio will maintain a separate volume level and Blue Select distribution
from the wired audio source. If the Bluetooth connection is supporting a phone call, all
intercom positions listening to that source can also speak on the call through the headset
MICs.
Additional Bluetooth Control Functions
When the Audio Panel detects a recording device as the Bluetooth connected device,
the CREW ICS Annunciator will turn BLUE. All audio heard by the Pilot will be recorded.
Press and hold the
CREW
ICS Button to enable/disable Bluetooth Recording mode.
Summary of Contents for Beechcraft 200 Series
Page 1: ...Cockpit Reference Guide Beechcraft 200 B200 Series System Software Version 2286 07 or later ...
Page 2: ......
Page 4: ......
Page 269: ......